Pro Drain Chief Low Speed, 110V
Pro Drain Chief Low Speed, 110V
$40844
Pro Drain Chief Low Speed, 110V gives commercial kitchens a cleaner, steadier way to feed liquid drain and grease-trap treatments. This plug-in peristaltic chemical dispensing pump meters product on a timed schedule, helping maintenance teams support drains, traps, and service routes without daily hand dosing during low-water windows.
- Low-speed output; meters liquid treatment at a controlled 4 oz/min pace
- Timed daily dosing; supports up to 48 scheduled feeds per day
- Plug-in operation; fits standard 110-volt outlet locations
- Grease-trap fit; built for drain and grease-trap maintenance programs
- Compact wall mount; installs close to the supply and injection point
- Viking-made equipment; built by a U.S. dispensing-system manufacturer
Choose Pro Drain Chief for steady, automatic drain-care dosing in busy kitchens and facility service routes.
Recommended companion treatment program
NT-MAX Drain & Grease Trap Treatment. 5 Gallon. Pail. Industrial Strength Drain & Grease Trap Treatment with bio-enzymatic power that liquefies stubborn FOG, stops odors, and keeps….
Bundle savings may be available below when eligible.
Frequently bought together
Product Description
Keep Drain-Treatment Dosing on Schedule
Pro Drain Chief Low Speed, 110V is built for operators who want drain and grease-trap maintenance to happen consistently, not only when someone remembers. The compact wall-mounted dispenser uses a timed peristaltic pump to feed liquid treatment from a supply container to the injection point, making it a strong fit for outlet-equipped commercial kitchens, foodservice facilities, and service routes that need steady low-speed dosing.
Key Features & Benefits
| Feature | Benefit |
|---|---|
| Low-speed pump output | Delivers a controlled 4 oz/min pace for measured drain-treatment feeding. |
| Timed dosing control | Supports repeated daily feeds so maintenance stays consistent across shifts. |
| 110-volt plug-in power | Works well where a standard outlet is available near the service area. |
| Compact wall-mounted housing | Fits close to the chemical supply and injection point without a bulky footprint. |
| Optional tube configurations | Lets the dispenser be matched to bacteria, enzyme, solvent, or D-limonene products. |
Directions & Dosing Snapshot
| Use Case | Label Rate | Application Notes |
|---|---|---|
| Low-speed daily feed | 4 oz/min nominal output | Use for steady drain or grease-trap treatment where lower-volume timed dosing is preferred. |
| Daily scheduling | Up to 48 feed cycles per 24 hours | Timer tabs can trigger as often as twice per hour when every on time is followed by off time. |
| Standard board run time | Approx. 4 seconds to 10 minutes per run-time chart | Actual output can vary with viscosity, tubing length, lift, and installation conditions. |
| Injection setup | 1/4 in. supply and output tubing | Mount in a dry location close to both the chemical supply and injection point. |
| Tube selection | SuperTube or optional Viton configuration | Match the tube style to the liquid product before installation. |
Always follow the complete manufacturer installation instructions and the chemical product directions used with the dispenser.
Comparison Table
| Pro Drain Chief Low Speed, 110V | Battery-Powered Drain Doser | Digital Quick-Change Drain Doser | Manual Drain-Treatment Pouring | |
|---|---|---|---|---|
| Power approach | Standard 110-volt plug-in | Battery dependent | Varies by model | No dispenser power |
| Dosing pattern | Timed low-speed feeds | Varies by model | Programmable feeds | Staff-dependent routine |
| Best-fit setting | Outlet-equipped kitchens and grease-trap programs | Locations without outlets | Sites wanting digital programming | Light or occasional maintenance |
| Service footprint | Compact 7 in. x 7 in. x 6.5 in. housing | Varies by model | Varies by model | No installed pump |
| Routine control | Repeatable timing once set | Varies by battery condition | Varies by model | Relies on staff consistency |
Why Choose Automatic Low-Speed Drain Dosing?
- Consistent maintenance rhythm: Timed feeds help keep drain treatment from becoming a forgotten closing-task chore.
- Lower-volume control: The low-speed output is useful when frequent, measured doses are preferred over larger bursts.
- Cleaner service workflow: Wall-mounted equipment helps standardize drain-care routines across kitchens, facilities, and routes.
This product is distributed by NewTechBio as an authorized reseller. Specifications, treatment rates, and performance claims are sourced from the official manufacturer label and published documentation. NewTechBio does not independently verify manufacturer claims. Always read and follow the label.
Last updated for listing accuracy: 05/17/2026
What is Pro Drain Chief Low Speed, 110V used for?
Is Pro Drain Chief Low Speed, 110V a good fit for commercial kitchen grease-trap maintenance?
How much chemical does Pro Drain Chief Low Speed dispense?
How many times per day can Pro Drain Chief run?
Does Pro Drain Chief Low Speed, 110V need a standard outlet?
What type of liquid drain treatment can Pro Drain Chief dispense?
Where should the Pro Drain Chief pump be installed?
Will Pro Drain Chief clear a fully stopped drain?
Should I choose low speed or high speed for a drain dosing pump?
What maintenance does Pro Drain Chief need?
Product Details
SKU: NTBIO3744780
Category: Application Equipment
Brand: Viking
Product Information Sheet: View Sheet (PDF)
Weight: 9 lbs
Dimensions: 8 x 8 x 8 in
Important Information
SDS: N/A
LABEL (Directions & Rates): View Product Label (PDF)
Comments/Other: Review the Product Label and SDS for directions, rates, and safety information.
Certifications / Registrations: UL Listed
Origin: Made in the USA
Feature: Highly accurate dosing
Product Form: 110v device
Product Details
Keep Drain-Treatment Dosing on Schedule
Pro Drain Chief Low Speed, 110V is built for operators who want drain and grease-trap maintenance to happen consistently, not only when someone remembers. The compact wall-mounted dispenser uses a timed peristaltic pump to feed liquid treatment from a supply container to the injection point, making it a strong fit for outlet-equipped commercial kitchens, foodservice facilities, and service routes that need steady low-speed dosing.
Key Features & Benefits
| Feature | Benefit |
|---|---|
| Low-speed pump output | Delivers a controlled 4 oz/min pace for measured drain-treatment feeding. |
| Timed dosing control | Supports repeated daily feeds so maintenance stays consistent across shifts. |
| 110-volt plug-in power | Works well where a standard outlet is available near the service area. |
| Compact wall-mounted housing | Fits close to the chemical supply and injection point without a bulky footprint. |
| Optional tube configurations | Lets the dispenser be matched to bacteria, enzyme, solvent, or D-limonene products. |
Directions & Dosing Snapshot
| Use Case | Label Rate | Application Notes |
|---|---|---|
| Low-speed daily feed | 4 oz/min nominal output | Use for steady drain or grease-trap treatment where lower-volume timed dosing is preferred. |
| Daily scheduling | Up to 48 feed cycles per 24 hours | Timer tabs can trigger as often as twice per hour when every on time is followed by off time. |
| Standard board run time | Approx. 4 seconds to 10 minutes per run-time chart | Actual output can vary with viscosity, tubing length, lift, and installation conditions. |
| Injection setup | 1/4 in. supply and output tubing | Mount in a dry location close to both the chemical supply and injection point. |
| Tube selection | SuperTube or optional Viton configuration | Match the tube style to the liquid product before installation. |
Always follow the complete manufacturer installation instructions and the chemical product directions used with the dispenser.
Comparison Table
| Pro Drain Chief Low Speed, 110V | Battery-Powered Drain Doser | Digital Quick-Change Drain Doser | Manual Drain-Treatment Pouring | |
|---|---|---|---|---|
| Power approach | Standard 110-volt plug-in | Battery dependent | Varies by model | No dispenser power |
| Dosing pattern | Timed low-speed feeds | Varies by model | Programmable feeds | Staff-dependent routine |
| Best-fit setting | Outlet-equipped kitchens and grease-trap programs | Locations without outlets | Sites wanting digital programming | Light or occasional maintenance |
| Service footprint | Compact 7 in. x 7 in. x 6.5 in. housing | Varies by model | Varies by model | No installed pump |
| Routine control | Repeatable timing once set | Varies by battery condition | Varies by model | Relies on staff consistency |
Why Choose Automatic Low-Speed Drain Dosing?
- Consistent maintenance rhythm: Timed feeds help keep drain treatment from becoming a forgotten closing-task chore.
- Lower-volume control: The low-speed output is useful when frequent, measured doses are preferred over larger bursts.
- Cleaner service workflow: Wall-mounted equipment helps standardize drain-care routines across kitchens, facilities, and routes.
SKU: NTBIO3744780
Category: Application Equipment
Brand: Viking
Product Information Sheet: View Sheet (PDF)
Weight: 9 lbs
Dimensions: 8 x 8 x 8 in
SDS: N/A
LABEL (Directions & Rates): View Product Label (PDF)
Comments/Other: Review the Product Label and SDS for directions, rates, and safety information.
Certifications / Registrations: UL Listed
Origin: Made in the USA
Feature: Highly accurate dosing
Product Form: 110v device
